HFS: IP masks: Difference between revisions
Jump to navigation
Jump to search
m (Reverted edits by 74.42.127.23 (Talk); changed back to last version by Rejetto) |
|||
| (2 intermediate revisions by one other user not shown) | |||
| Line 7: | Line 7: | ||
== Single IP == | == Single IP == | ||
Just type the IP you want to specify: | Just type the IP you want to specify: | ||
<pre> | <pre>192.168.0.20</pre> | ||
== All but one == | == All but one == | ||
Latest revision as of 14:10, 21 December 2011
Computers in every network (for example, the Internet or a LAN) are identified by IP addresses (normally shortened to just IP).
For some input in HFS (e.g. banning), you need to specify one or more IPs.
The following describes the syntax you can use to specify such IPs.
Single IP
Just type the IP you want to specify:
192.168.0.20
All but one
To exclude an IP, put a backslash \ before it:
\192.168.0.20
IP ranges
Ranges can be specified by putting a dash - between the first and last IP:
192.168.0.20-192.168.0.50
192.168.0.20 and 192.168.0.50 are inclusive.
Wildcards
You can also use wildcards (? for single character, * for any number of characters):
192.168.*.* 1?2.*.1.1
Concatenation
Use a semicolon ; to specify more than one address:
192.2.3.4;192.5.6.7
Combinations
You can combine any of the above methods in the same IP mask:
\192.168.?.*;10.0.0.1-10.0.0.5