HFS: IP masks: Difference between revisions

From rejetto wiki
Jump to navigation Jump to search
m (Reverted edit of 85.196.188.51, changed back to last version by Rejetto)
No edit summary
Line 1: Line 1:
Computers in every network (e.g.,Internet, LAN,...) are identified by IP addresses (shortened to ''IP'').
Computers in every network (e.g.,Internet, LAN,...) are identified by IP addresses (shortened to ''IP'').


For some input in HFS you have to specify one or more IP (e.g. banning).
For some input in HFS (e.g. banning).you need to specify one or more IP


This article describes the syntax you can use to specify such IPs.
This article describes the syntax you can use to specify such IPs.

Revision as of 15:42, 10 October 2006

Computers in every network (e.g.,Internet, LAN,...) are identified by IP addresses (shortened to IP).

For some input in HFS (e.g. banning).you need to specify one or more IP

This article describes the syntax you can use to specify such IPs.

Single IP

Just type the IP you want:

192.168.0.20

All but one

To exclude an IP, put a backslash \ before it:

\192.168.0.20

IP ranges

Ranges can be specified by putting a dash - between first and last IP

192.168.0.20-192.168.0.50

192.168.0.20 and 192.168.0.50 are included.

Wildcards

You can use wildcards as well (? for single character, * for any number of characters)

192.168.*.*
1?2.*.1.1

Concatenation

Using semicolon ; you can specify more than one address

192.2.3.4;192.5.6.7

Combinations

You can combine any of the above methods in the same IP mask

\192.168.?.*;10.0.0.1-10.0.0.5